SSLStrip and the HSTS Chronicles
This tool basically works by intercepting the requests going between the ARP poisoned victim and the router, replacing the HTTPS requests with HTTP ones (downgrade attack), so that an attacker is able to sniff even the traffic that the user thinks is encrypted and should be (make always sure that whenever you are visiting a secure website a lock or any visible sign confirms that the connection is encrypted, otherwise someone might be eavesdropping on you).
To solve this problem, HSTS headers were introduced in most browsers. This new technology blocks whatever HTTP connection is established with a web page that is supposed to be safe and use a secure protocol and usually spawns a warning. This is done by comparing the addresses visited with those on a table of registered secure pages to which other less famous web sites are added the first time they are visited by the user. This reduced the capabilities of SSLStrip to strip just pages that were never visited before and were not using certificates on the list of certified addresses of the browser.
Exploiting DNS Servers Changes
Recently a new vulnerability has been treating internet users. HSTS headers could be considered secure at first, but the vulnerability found by the author of SSLStrip2 (sometimes SSLStrip+), LeonardoNve, was quite easy: adding a little detail in the request (like a fourth “w” in world wide web) so that the router’s DNS doesn’t know how to react to it. At this point, an attacker may just redirect the request to his own previously set up DNS alternative proxy that will respond with the HTTP version of the requested page, basically hijacking address resolution.
This way, HSTS can be bypassed, most of the times.
Requirements to Proof the Vulnerability
As you might have realized, this poses a significant threat that anybody should be aware of and be able to protect from. To raise security awareness, the tool has been released to the public and the attack has been integrated in some MITM services. I chose to use one special tool that integrates this and many other attacks to demonstrate the attack: MITM framework, or MITMf.
Disclaimer: I don’t own any of the content linked in this post, and I’m not aware of any treat that these pages may pose to your safety (mostly Github). I absolutely discourage using these tools for malicious purposes.
If you don’t know what you are doing, DON’T DO IT. This article is for educational and security awareness purposes only. If anything in this page might be considered illegal, I encourage the admins to delete this contents immediately.
The tool linked uses a SSLStrip2 fork from “Byt3bl33d3r”.
You can download the tool on Kali Linux with:
apt-get install mitmf
Even though this version supports a lot of plugins, it’s outdated and very old. I’ve also found a lot of problems and incompatibilities running it, that’s why I’m going to report the process to download the latest version, the one published on github, which worked for me after some tweaking and error/bug fixing.
The reason why I’d like to show you this tool is because it is an alternative to Arpspoof and Ettercap, and also has the specially crafted DNS proxy integrated (along with lot of useful plugins and atomizations). If you had to do this without using MITMf, you would have to setup SSLStrip2 and the DNS proxy used by MITMf (dns2proxy) by yourself. However, these two tools have been deleted from their own repo because of legal issues. These tools may in fact be used for malicious purposes. You don’t always use knifes to kill people, but somebody does, and who does must be arrested.
Also, MITMf has a straight to the point text interface, which makes it look very light, and it supports a lot of interesting plugins which I’ll talk about later and recommend you to check out.
Outdated Downloading Process, See Below
To download the latest version directly from the gihub repository of the fork, open a terminal in the Desktop and type:
git clone https:/ /github.com/byt3bl33d3r/MITMf.git
The git utility will start to clone the folder on your Desktop.
Once you are done, cd into the MITMf directory just created and run the setup:
One last step is left, we need to install some required packages for python. We’ll do that trough the pip utility. Make sure you are using python2 (tested with python 2.7), as python3 might throw some syntax errors. Kali should include “pip2” as default. If you get any error, ask in the comments. Eventually, you may try to “curl -o get-pip.py.py https:/ /bootstrap.pypa.io/get-pip.py ” and then run “python get-pip.py” that will also install setuptools if you don’t have them, or try using “pip” instead of “pip2”. As a final step for the installation, run, in the MITMf folder:
pip2 install –upgrade -r requirements.txt
Then, python mitmf.py –help to show the help page running the program.
Fixed Downloading Process:
For some compatibility issues regarding byt3bl33d3r trying to include in his project libraries as standalones for better portability, the fast-deployable quality was a little bit overlooked. Because of that, I created a simple script that can be found in my fork of MITMf, along with the mitmflib decompressed (I may compress it or remove it and make the script download and decompress it in future):
git clone https: //github.com/CiuffysHub/MITMf
chmod 777 setup-fixed.sh
Download and installation has been reported successfully on Kali Linux light 2.0 64 bit.
In case you get any of the following errors:
1) When I run the command “pip install…” I get an error at the requirement at line 16, “pypcap”.
- You don’t need that. As you can see opening the requirements file, it’s the last of them. To make sure that missing packet will no cause any error, you can install it with apt-get install python-pypcap as shown in the installation guide on the github repository (“ImportError: no module named pcap“, mostly on Kali Linux).
2) Whenever I run mitmf.py trough python, I get an error related to “watchdog.observers”.
- It’s related to some missing packet synchronization. To solve the problem, type “pip2 install watchdog“, or if that’s your case, use the regular “pip” instead of pip2. Another packet should missing, also pip2 install dsnlib, and you should be able to run mitmf.py.
3) When I run mitmf.py, I get the error “ImportError: cannot import name LOG“.
- Download the latest version of “Impacket” and install it running “python setup.py install”.
Edit: link broken, cone this repo: https://github.com/CoreSecurity/impacket.git
4) If you get “SyntaxError: invalid syntax” at line 70 or around, you might be running python3. Make sure you are running python2, so if python3 is the main python version (you see that if you run python, it shows the version), then run mitmf like this: “python2 mitmf.py“. If anyone gets it working on python3, or the creators adopted python3 and I haven’t added it in this guide, feel free to write in the comments.
So far, these are the problems I encountered. I’d appreciate if anybody contributed to this troubleshooting section.
First of all, take a look at the help pages, you’ll find out a lot of cool stuff.
The options we are going to use and analyze today are:
-i: to specify the interface we want to run the MITM attack trough;
–spoof: to redirect or modify the hijacked traffic;
–apr: to specify that we want to redirect the traffic trough ARP spoofing;
–hsts: to load SSLStrip+ plugin;
–dns: to load a proxy to modify DNS queries;
–gateway: to specify the gateway;
–target:to specify the target.
If everything is ok with your installation, this should be the initial part of the output:
Startup MITMf output
MITMf will start logging the requests from the target and showing them in the output. MITMf also makes sure that if the request can’t be stripped, the regular HTTPS page is shown, so that no certificate related errors shown.
Sample of hijacked traffic against Android Browser and Dolphin Android Browser
Sometimes, MITMf may do something different than just adding an extra “w”, for example changing urls with similar addresses that don’t really exist, like with google services. When requests like these are made, the stuffed DNS proxy knows that it should respond with the HTTP version of the similar page.
Output sample including the action of the tool “DNSChef”
This was tested by me on Kali Linux 1.0.9 updated in June 2015, using MITMf version 0.9.7.
Attacks were completely* successful against the Stock Browser of a Samsung Galaxy S5 SM-G900F running Android 4.4.2 and Android Browser on SGH-T989 running CM12.1 Lollipop (08/10/15), partially** successful against Safari 6.0.5 and Firefox 32.0.2 on a MacBook Pro running OSX 10.8.4, and unsuccessful*** against Google Chrome 43.0 (both mobile and not).
*completely vulnerable: whenever a connection to a HTTPS page was requested, a HTTP version of the page was shown.
**partially vulnerable: the attack worked only in particular conditions, especially links and via stripped versions of research engines like Yahoo or Google, but didn’t work in other conditions, mostly by accessing the pages trough a collection of saved addresses or a home page.
***unsuccessful: the attack was completely unsuccessful and didn’t affect the browsing at all.
If you think you are vulnerable, you should update now or change your main browser to a safer one.
Requesting a test again Internet Explorer, Opera, more up to date versions of Firefox and Safari and Google Chrome, please post the results in the comments section, thanks!
Other MITMf Useful Plugins
- Responder: this is actually a very interesting tool I’ve discovered before MITMf from SpiderLabs. “Responder is a LLMNR, NBT-NS and MDNS poisoner, with built-in HTTP/SMB/MSSQL/FTP/LDAP rogue authentication server supporting NTLMv1/NTLMv2/LMv2, Extended Security NTLMSSP and Basic HTTP authentication.[Github Page]” I was in need of this when trying pass the hash attacks (with the help of Metasploit) against Windows boxes up to Vista (SMB & NTLMv2). ZackAttack was able to do even more, but the project was abandoned soon after it was presented way back in 2012 . It is so abandoned that the first result on Google is actually a Cincinnati dance group, but whatever.
- Of course, the regular SSLStrip by Moxie Marlinspike.
- Inject: basically the same function as Ettercap filters.
- BrowserProfiler: “Attempts to enumerate all browser plugins of connected clients”, like BeEF does.
- SMBTrap: “Tools developed to test the Redirect to SMB issue (Github)”
- Filepwn: “Backdoor executables being sent over http using bdfactory”
- Ferret-NG: “Captures cookes and starts a proxy that will feed them to connected clients”
- Upsidedownternet: Flips images 180 degrees, to show people what not updating leads up to. Or down, whatever.
- BrowserSniper: “Performs drive-by attacks on clients with out-of-date browser plugins”
- … And last but not least, dulcis in fundo: BeEFAutorun: “Injects BeEF hooks & autoruns modules based on Browser and/or OS type”, basically what I’ve explained how to do with Ettercap in my very first post on Null Byte: “Beef + Ettercap Pwning Marriage”. The feels are over nine thousand right now.